For the reaction R ? P, the concentration of a reactant changes from 0.03 M to 0.02 M in 25 minutes. Calculate the average rate of reaction using units of time both in minutes and seconds.
In a reaction, 2A ? Products, the concentration of A decreases from 0.5 mol L-1 to 0.4 mol L-1 in 10 minutes. Calculate the rate during this interval?
Forareaction,A+B?Product;theratelawisgivenby,. What is the order of the reaction?
The conversion of molecules X to Y follows second order kinetics. If concentration of X is increased to three times how will it affect the rate of formation of Y?
A first order reaction has a rate constant 1.15 10-3 s-1. How long will 5 g of this reactant take to reduce to 3 g?
Time required to decompose SO2Cl2 to half of its initial amount is 60 minutes. If the decomposition is a first order reaction, calculate the rate constant of the reaction.
What will be the effect of temperature on rate constant?
The rate of the chemical reaction doubles for an increase of 10 K in absolute temperature from 298 K. CalculateEa.
The activation energy for the reaction 2HI(g) ? H2 + I2(g) is 209.5 kJ mol-1 at 581K. Calculate the fraction of molecules of reactants having energyequal to or greater than activation energy?
From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants. (i) 3 NO(g) ? N2O (g) Rate = k[NO]2 (ii) H2O2 (aq) + 3 I- (aq) + 2 H+? 2 H2O(l)+Rate =k[H2O2][I-] (I) CH3CHO(g) ? CH4(g) + CO(g) Rate = k[CH3CHO]3/2 (II) C2H5Cl(g) ? C2H4(g) + HCl(g) Rate = k[C2H5Cl]
For the reaction: 2A + B ? A2B the rate = k[A][B]2 with k = 2.0 × 10-6 mol-2 L2 s-1. Calculate the initial rate of the reaction when [A] = 0.1 mol L-1, [B] = 0.2 mol L-1. Calculate the rate of reaction after[A] is reduced to 0.06 mol L-1.
The decomposition of NH3 on platinum surface is zero order reaction. What are the rates of production of N2 and H2 if k = 2.5 × 10-4 mol-1 L s-1?
The decomposition of dimethyl ether leads to the formation of CH4, H2 and CO and the reaction rate is given by Rate = k [CH3OCH3]3/2 The rate of reaction is followed by increase in pressure in a closed vessel, so the rate can also be expressed in terms of the partial pressure of dimethyl ether, i.e., If the pressure is measured in bar andtime in minutes, then what are the units of rate and rate constants?
Mention the factors that affect the rate of a chemical reaction.
A reaction is second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is(i) doubled (ii) reduced to half?
What is the effect of temperature on the rate constant of a reaction? How can this temperature effect on rate constant be represented quantitatively?
In a pseudo first order hydrolysis of ester in water, the following results were obtained: t/s 0 30 60 90 [Ester]mol L-1 0.55 0.31 0.17 0.085 (I) Calculate the average rate of reaction between the time interval 30 to 60seconds. (II) Calculate the pseudo first order rate constant for the hydrolysis ofester.
A reaction is first order in A and second order in B. (I) Write the differential rateequation. (II) How is the rate affected on increasing the concentration of B threetimes? (III) How is the rate affected when the concentrations of both A and B aredoubled?
In a reaction between A and B, the initial rate of reaction (r0) was measured for different initial concentrations of A and B as given below: A/ mol L-1 0.20 0.20 0.40 B/ mol L-1 0.30 0.10 0.05 r0/ mol L-1 s-1 5.07 × 10-5 5.07 × 10-5 1.43 × 10-4What is the order of the reaction with respect to A and B?
The following results have been obtained during the kinetic studies of the reaction: 2A + B ? C +D Experiment A/ mol L-1 B/ mol L-1 Initial rate of formation of D/mol L-1 min-1 I 0.1 0.1 6.0 × 10-3 II 0.3 0.2 7.2 × 10-2 III 0.3 0.4 2.88 × 10-1 IV 0.4 0.1 2.40 × 10-2Determine the rate law and the rate constant for the reaction.
The reaction between A and B is first order with respect to A and zero order with respect to B. Fill in the blanks in the following table: Experiment A/ mol L-1 B/ mol L-1 Initial rate/mol L-1 min-1 I 0.1 0.1 2.0 × 10-2 II -- 0.2 4.0 × 10-2 III 0.4 0.4 -- IV -- 0.2 2.0 × 10-2
Calculate the half-life of a first order reaction from their rate constants given below: (i) 200 s-1 (ii) 2 min-1 (iii) 4 years-1
The half-life for radioactive decay of 14C is 5730 years. An archaeological artifact containing wood had only 80% of the 14C found in a living tree. Estimate the age of the sample.
The experimental data for decomposition of N2O5 in gas phase at 318K are given below: t(s) 0 400 800 120 0 160 0 200 0 240 0 280 0 320 0 1.6 3 1.3 6 1.1 4 0.93 0.78 0.64 0.53 0.43 0.35 (I) Plot [N2O5] againstt. (II) Find the half-life period for thereaction. (III) Draw a graph between log [N2O5] andt. (IV) What is the ratelaw? (V) Calculate the rateconstant. (VI) Calculate the half-life period from k and compare it with(ii).
The rate constant for a first order reaction is 60 s-1. How much time will it take to reduce the initial concentration of the reactant to its 1/16thvalue?
During nuclear explosion, one of the products is 90Sr with half-life of 28.1 years. If 1µg of 90Sr was absorbed in the bones of a newly born baby instead of calcium, how much of it will remain after 10 years and 60 years if it is not lostmetabolically.
For a first order reaction, show that time required for 99% completion is twice the time required for the completion of 90% of reaction.
A first order reaction takes 40 min for 30% decomposition. Calculate t1/2.
For the decomposition of azoisopropane to hexane and nitrogen at 543 K, the following data are obtained. t (sec) P(mm of Hg) 0 35.0 360 54.0 720 63.0Calculate the rate constant.
The following data were obtained during the first order thermal decomposition of SO2Cl2 at a constant volume. Experiment Time/s-1 Total pressure/atm 1 0 0.5 2 100 0.6Calculate the rate of the reaction when total pressure is 0.65 atm.
The rate constant for the decomposition of N2O5 at various temperatures is given below: T/°C 0 20 40 60 80 0.0787 1.70 25.7 178 2140 Draw a graph between ln k and 1/T and calculate the values of A and Ea. Predict the rate constant at 30º and 50ºC.
The rate constant for the decomposition of hydrocarbons is 2.418 × 10-5 s-1 at 546 K. If the energy of activation is 179.9 kJ/mol, what will be the value of pre-exponential factor.
Consider a certain reaction A ? Products with k = 2.0 × 10-2 s-1. Calculate the concentration of A remaining after 100 s if the initial concentration of A is 1.0 mol L-1.
Sucrose decomposes in acid solution into glucose and fructose according to the first order rate law, with t1/2 = 3.00 hours. What fraction of sample of sucrose remains after 8 hours?
The decomposition of hydrocarbon follows the equation k = (4.5 × 1011 s-1) e-28000 K/TCalculate Ea.
The rate constant for the first order decomposition of H2O2 is given by the following equation: log k = 14.34 - 1.25 × 104 K/T Calculate Ea for this reaction and at what temperature will its half-period be 256 minutes?
The decomposition of A into product has value of k as 4.5 × 103 s-1 at 10°C and energy of activation 60 kJ mol-1. At what temperature would k be 1.5 × 104 s-1?
The time required for 10% completion of a first order reaction at 298 K is equal to that required for its 25% completion at 308 K. If the value of A is 4 × 1010 s-1. Calculate k at 318 K and Ea.
The rate of a reaction quadruples when the temperature changes from 293 K to 313 K. Calculate the energy of activation of the reaction assuming that it does not change with temperature.
Units And Measurements
Motion in a straight Line
Motion in a Plane
Law of Motion
Work, Energy and Power
System of Particles and Rotational Motion
Gravitation
Mechanical Properties of Solids
Mechanical Properties of Fluids
Thermal Properties of Matter
Thermodynamics
Kinetic Theory
Oscillations
Waves
Some Basic Concepts Of Chemistry
Structure Of Atom
Classification Of Elements & Periodicity
Chemical Bonding
States Of Matter
Equilibrium
Redox Reactions
Hydrogen
The S-block Elements
The P-block Elements
Organic Chemistry Some Basic Principles
Hydrocarbons
Environmental-Chemistry
Sets
Relations & Functions
Trigonometric Functions
Principle Of Mathematical Induction
Complex Numbers & Quadratic Equations
Linear Inequalities
Permutations & Combinations
Binomial Theorem
Sequences & Series
Straight Lines
Conic Sections
3D Geometry
Electric Charges & Fields
Electrostatic Potential & Capacitance
Current Electricity
Magnetism & Matter
Electromagnetic Induction
Alternating Current
Electromagnetic Waves
Ray Optics & Optical Instruments
Wave Optics
Dual Nature Of Radiation & Matter
Atoms
Nuclei
Semiconductor Electronics Materials
Communication Systems
Solid State
Solutions
Electrochemistry
Chemical Kinetics
Surface Chemistry
General Principle and Process
The pblock elements
The d & f block elements
Coordination Compounds
Haloalkanes & haloarenes
Alcohols Phenols & Ethers
Aldehydes Ketones & Carboxylic Acids
Amines
Biomolecules
Polymers
Chemistry In Everyday Life
Inverse Trignometric Functions
Matrices
Determinants
Continuity & Differentiability
Application of Derivatives
Integrals
Applications Of Integrals
Differential Equations
Vector Algebra
Linear Programing
Probability