Calculate the molecular mass of the following:(i) H2O (ii) CO2 (iii) CH4

Calculate the mass percent of different elements present in sodium sulphate (Na2SO4).

Determine the empirical formula of an oxide of iron which has 69.9% iron and 30.1% dioxygen by mass.

Calculate the amount of carbon dioxide that could be produced when (I) 1 mole of carbon is burnt inair. (II) 1 mole of carbon is burnt in 16 g ofdioxygen. (III) 2 moles of carbon are burnt in 16 g of dioxygen.

Calculate the mass of sodium acetate (CH₃COONa) required to make 500 mL of 0.375 molar aqueous solution. Molar mass of sodium acetate is 82.0245 g mol^–1

Calculate the concentration of nitric acid in moles per litre in a sample which has a density, 1.41 g mL^–1 and the mass per cent of nitric acid in it being 69%.

How much copper can be obtained from 100 g of copper sulphate (CuSO4)?

Determine the molecular formula of an oxide of iron in which the mass per cent of iron and oxygen are 69.9 and 30.1 respectively. Given that the molar mass of the oxide is159.69 g mol–1.

Calculate the atomic mass (average) of chlorine using the following data: % Natural Abundance Molar Mass 35Cl 75.77 34.9689 37Cl 24.23 36.9659

In three moles of ethane (C₂H₆), calculate the following: (I) Number of moles of carbonatoms. (II) Number of moles of hydrogenatoms. (III) Number of molecules ofethane.

What is the concentration of sugar (C₁₂H₂₂O₁₁) in mol L^–1 if its 20 g are dissolved in enough water to make a final volume up to 2 L?

If the density of methanol is 0.793 kg L^–1, what is its volume needed for making 2.5 L of its 0.25 M solution?

Pressure is determined as force per unit area of the surface. The SI unit of pressure, Pascal is as shown below: 1Pa = 1N m^–2If mass of air at sea level is 1034 g cm–2, calculate the pressure in Pascal.

What is the SI unit of mass? How is it defined?

Match the following prefixes with their multiples: Prefixes Multiples (i) micro 10⁶ (ii) deca 10⁹ (iii) mega 10–6 (iv) giga 10–15 (v) femto 10

What do you mean by significant figures?

A sample of drinking water was found to be severely contaminated with chloroform, CHCl₃, supposed to be carcinogenic in nature. The level of contamination was 15 ppm (bymass). (I) Express this in percent bymass. (II) Determine the molality of chloroform in the watersample.

Express the following in the scientific notation: (i) 0.0048 (ii) 234,000 (I) 8008(iv) 500.0 (v) 6.0012

How many significant figures are present in the following? (i) 0.0025 (I) 208 (II) 5005 (iv) 126,000 (v)500.0(vi) 2.0034

Round up the following upto three significant figures: (i) 34.216 (ii) 10.4107 (iii) 0.04597 (I) 2808

The following data are obtained when dinitrogen and dioxygen react together to form different compounds: MassofdinitrogenMass of dioxygen (I) 14g16 g (II) 14g32 g (III) 28g32 g (IV) 28g80 g (V) Which law of chemical combination is obeyed by the above experimental data?Give itsstatement. (VI) Fill in the blanks in the followingconversions: (i) 1 km = ......................mm=pm (ii) 1 mg = ......................kg =ng (iii) 1 mL = ......................L=dm³

If the speed of light is 3.0 ×108 m s-1, calculate the distance covered by light in 2.00 ns.

In a reaction A + B₂? AB₂ Identify the limiting reagent, if any, in the following reaction mixtures. (I) 300 atoms of A + 200 molecules ofB (II) 2 mol A + 3 molB (III) 100 atoms of A + 100 molecules ofB (IV) 5 mol A + 2.5 molB (V) 2.5 mol A + 5 mol B

Dinitrogen and dihydrogen react with each other to produce ammonia according to the following chemical equation: N2(g) + H2(g) ? 2NH3(g) (I) Calculatethemassofammoniaproducedif2.00×10³gdinitrogenreactswith1.00 × 10³ g of dihydrogen. (II) Will any of the two reactants remainunreacted? (III) If yes, which one and what would be itsmass?

How are 0.50 mol Na2CO3 and 0.50 M Na2CO3 different?

If ten volumes of dihydrogen gas react with five volumes of dioxygen gas, how many volumes of water vapour would be produced?

Convert the following into basic units: (I) 28.7pm (II) 15.15pm (III) 25365 mg

Which one of the following will have largest number of atoms? (I) 1 g Au(s) (II) 1 g Na(s) (III) 1 g Li(s) (IV) 1 g of Cl2(g)

Calculate the molarity of a solution of ethanol in water in which the mole fraction of ethanol is 0.040 (assume the density of water to be one).

What will be the mass of one 12C atom in g?

How many significant figures should be present in the answer of the following calculations? (i) (ii) 5 × 5.364 (iii) 0.0125 + 0.7864 + 0.0215

Use the data given in the following table to calculate the molar mass of naturally occurring argon isotopes: Isotope Isotopic molar mass Abundance 36Ar 35.96755 gmol^–1 0.337% 38Ar 37.96272 gmol–1 0.063% 40Ar 39.9624 gmol^–1 99.600%

Calculate the number of atoms in each of the following (i) 52 moles of Ar (ii) 52 u of He (iii) 52 g of He.

A welding fuel gas contains carbon and hydrogen only. Burning a small sample of it in oxygen gives 3.38 g carbon dioxide, 0.690 g of water and no other products. A volume of 10.0 L (measured at STP) of this welding gas is found to weigh 11.6 g. Calculate (i) empirical formula, (ii) molar mass of the gas, and (iii) molecularformula.

Calcium carbonate reacts with aqueous HCl to give CaCl₂ and CO₂ according to the reaction, CaCO_3(s) + 2 HCl_(aq)? CaCl_2(aq) + CO_2(g) + H₂O_(l)What mass of CaCO3 is required to react completely with 25 mL of 0.75 M HCl?

Chlorine is prepared in the laboratory by treating manganese dioxide (MnO₂) with aqueous hydrochloric acid according to the reaction 4HCl(aq) + MnO2(s) ? 2H2O(l) + MnCl2(aq) + Cl2(g)How many grams of HCl react with 5.0 g of manganese dioxide?